The working principle of
generator lubrication system mainly includes the following steps:
The circulation process of lubricating oil: The lubricating oil is pumped from the oil pan and pressed to various parts of the engine through the oil pump. When the lubricating oil is pumped into the engine, it needs to be filtered through the oil filter to remove impurities and particles to ensure the cleanliness of the engine.
Distribution of lubricating oil: After the lubricating oil enters the engine, it is divided into multiple paths for lubrication. For example, a part of the lubricating oil passes through the main oil channel of the diesel engine body and enters the connecting rod big end bearing, camshaft and piston, etc., to form a pressure oil film and reduce friction and wear between parts.
Cooling process: The lubricating oil will heat up during the circulation process, so it needs to be cooled by the cooler. The lubricating oil enters the oil cooler for cooling, and then flows back to the oil pan to form a cycle.
Composition of the lubrication system: The lubrication system of the diesel generator set is mainly composed of an oil pump, a centrifugal fine filter, an oil coarse filter, an air-cooled oil radiator and a water-cooled oil radiator. These components work together to ensure the normal operation of the lubrication system and the reliable operation of the engine.
Through the above steps and components, the lubrication system of the generator can better reduce the friction and wear inside the engine, extend the service life of the equipment, and maintain the normal operation of the engine.
More information:
http://www.zhaofdj.com/
